Weight |
16.2 kg |
Motor size |
110 |
Size |
560 mm |
Rotor surface |
Cast in aluminum |
Terminal box material |
PP plastic |
Blade material |
Sheet aluminum insert, sprayed with PP plastic |
Guard grille material |
Steel, coated with black plastic (RAL 9005) |
Number of blades |
5 |
Blade pitch |
-5° |
Airflow direction |
V |
Direction of rotation |
Counterclockwise, viewed toward rotor |
Degree of protection |
IP54 |
Insulation class |
"F" |
Ambient temperature note |
Occasional start-up at temperatures between -40°C and -25°C is permitted. For continuous operation at ambient temperatures below -25°C (such as refrigeration applications), use must be made of a fan design with special low-temperature bearings. |
Moisture (F) / Environmental (H) protection class |
H2 |
Max. permitted ambient temp. for motor (transport/storage) |
+80 °C |
Min. permitted ambient temp. for motor (transport/storage) |
-40 °C |
Installation position |
Shaft horizontal or rotor on bottom; rotor on top on request |
Condensation drainage holes |
On rotor side |
Mode |
S1 |
Motor bearing |
Ball bearing |
Touch current according to IEC 60990 (measuring circuit Fig. 4, TN system) |
<= 3,5 mA |
Electrical hookup |
Terminal box / Capacitor integrated and connected |
Motor protection |
Thermal overload protector (TOP) with basic insulation |
with cable |
Axial |
Protection class |
I (with customer connection of protective earth) |
Motor capacitor according to EN 60252-1 in safety protection class |
S0 |
Conformity with standards |
EN 60034-1 (2010) |
Approval |
VDE / EAC |