Weight |
17.9 kg |
Motor size |
112 |
Size |
800 mm |
Rotor surface |
Painted black |
Electronics housing material |
Die-cast aluminum, painted black |
Blade material |
Press-fitted sheet steel blank, sprayed with PP plastic |
Guard grille material |
Steel, coated with black plastic (RAL 9005) |
Number of blades |
5 |
Direction of rotation |
Clockwise, viewed toward rotor |
Degree of protection |
IP54 |
Insulation class |
"B" |
Moisture (F) / Environmental (H) protection class |
H2 |
Max. permitted ambient temp. for motor (transport/storage) |
+80 °C |
Min. permitted ambient temp. for motor (transport/storage) |
-40 °C |
Installation position |
Shaft horizontal or rotor on bottom; rotor on top on request |
Condensation drainage holes |
On rotor side |
Mode |
S1 |
Motor bearing |
Ball bearing |
Technical features |
- Output 10 VDC, max. 10 mA
- Alarm relay
- Motor current limitation
- PFC, active
- Soft start
- Control input 0-10 VDC
- Control interface with SELV potential safely disconnected from supply
- Thermal overload protection for electronics/motor
- Line undervoltage / phase failure detection |
EMC immunity to interference |
According to EN 61000-6-2 (industrial environment) |
EMC circuit feedback |
According to EN 61000-3-2/3 |
EMC interference emission |
According to EN 55022 (Class B, household environment) |
Touch current according to IEC 60990 (measuring circuit Fig. 4, TN system) |
<= 3,5 mA |
Motor protection |
Thermal overload protector (TOP) internally connected |
with cable |
Variable |
Protection class |
I (with customer connection of protective earth) |
Conformity with standards |
EN 61800-5-1 / CE |
Approval |
EAC / CCC |