| Weight |
12.02 kg |
| Motor size |
112 |
| Size |
800 mm |
| Rotor surface |
Painted black |
| Electronics housing material |
Die-cast aluminum, painted black |
| Blade material |
Press-fitted, painted sheet steel blank, sprayed with PP plastic |
| Number of blades |
5 |
| Airflow direction |
A |
| Direction of rotation |
Counterclockwise, viewed toward rotor |
| Degree of protection |
IP54 |
| Insulation class |
"B" |
| Moisture (F) / Environmental (H) protection class |
H2+A |
| Max. permitted ambient temp. for motor (transport/storage) |
+ 80 °C |
| Min. permitted ambient temp. for motor (transport/storage) |
- 40 °C |
| Installation position |
Shaft horizontal or rotor on top; rotor on bottom on request |
| Condensation drainage holes |
On stator side |
| Mode |
S1 |
| Motor bearing |
Ball bearing |
| Technical features |
- Output 10 VDC, max. 10 mA
- Output 20 VDC, max. 50 mA
- Output for slave 0-10 V
- Operation and alarm display
- Selection of direction of rotation left/right
- Input for sensor 0-10 V or 4-20 mA
- External 24 V input (parameter setting)
- Alarm relay
- Integrated PID controller
- Motor current limitation
- PFC, active
- RS-485 MODBUS-RTU
- Soft start
- Control input 0-10 VDC / PWM
- Control interface with SELV potential safely disconnected from supply
- Thermal overload protection for electronics/motor
- Line undervoltage / phase failure detection |
| Touch current according to IEC 60990 (measuring circuit Fig. 4, TN system) |
<= 3,5 mA |
| Electrical hookup |
Terminal box |
| Motor protection |
Thermal overload protector (TOP) internally connected |
| Protection class |
I (with customer connection of protective earth) |
| Conformity with standards |
EN 61800-5-1 / CE |
| Approval |
EAC |
